Shoot for the Art

[Solidstrike]

Hello gang,

I've got something new I wonna show you. I recently modelled some cars, the movie-verse altmode for Solidstrike and for Prowl. I finished Solidstrike (Nissan GT-R R35) earlier:







There are a few spots I am not satisfied with especially the rear part. I might start with him all over again. And then there was Prowl (Nissan 370Z), Solidstrikes best friend:







Here too are some parts I'm not fully satisfied with but I think I got Prowl much better. The idea and concept comes from Cascadia, a possible movie version of G1 Prowl. Both cars (GT-R and 370Z) designed by Nissan.

[SDL]

Dayum.... not tried making a 3D car yet... those two look sweet...

[Solidstrike]

Thank you, SDL

[sora]

Hello gang,

I've got something new I wonna show you. I recently modelled some cars, the movie-verse altmode for Solidstrike and for Prowl. I finished Solidstrike (Nissan GT-R R35) earlier:

There are a few spots I am not satisfied with especially the rear part. I might start with him all over again. And then there was Prowl (Nissan 370Z), Solidstrikes best friend:

Here too are some parts I'm not fully satisfied with but I think I got Prowl much better. The idea and concept comes from Cascadia, a possible movie version of G1 Prowl. Both cars (GT-R and 370Z) designed by Nissan.

Beautiful. GT-R is a nice car.

[Shadow]

looking very good Solidborat

[swishbig]

Those are nice Solid!

[DK Prime]

Awesome, Solly!:borat

[Solidstrike]

Thank you my friends

[chatterbox]

:O Awsome work!! what programme are u using?

try the robot mode?

[ciss]

[Solidstrike]

@Chatterbox: Im using 3D S Max from Autodesk. And if someone could provide me really good Blueprints I would give the robot mod a try. But I have a very tight schedule at the time being

[Solidstrike]

Little update:
There are four new pics on my DeviantArt Account

[nightshade]

keep up the good work solly

I am doing a repaint to match Shadow's Shadowcon alt mode of the F-22. Here is the model I am using it is made of Die Cast metal and will be having a wood base soon.

This is the unpainted jet and I wanted to show in stages of the paint job.

[Solidstrike]

mmmh looks sweet. Can't wait to see the final result And thanks ^^

[Shadow]

keep up the good work solly

I am doing a repaint to match Shadow's Shadowcon alt mode of the F-22. Here is the model I am using it is made of Die Cast metal and will be having a wood base soon.

This is the unpainted jet and I wanted to show in stages of the paint job.

Cant wait to see it finished Shade... once you are done, I'm going to re-mold one of my many ROTF Starscream voyagers to mimic your paint job of this diecast and re-mold a new head for the toy to look like Shadow's. Then Ill place them both side-by-side as a jet to bot mode look.

[nightshade]

thanks and i look forward to finishing it

[SDL]

Neither can i... haven't done a model kit in years...

Nice vehicle's SolidSnake...

A little commision image i'm doing for a friend....Noah's Ark

And the following Deviant Art links are of a small bachelor pad i'm making for a informal modelling challenge on a 3D forum i'm a member of. Been trying a couple of new techniques for it..

Bachelor Pad 1

Bachelor Pad 2

Bachelor Pad 3

[Cascadia]

try the robot mode?

And if someone could provide me really good Blueprints I would give the robot mod a try. But I have a very tight schedule at the time being.

People that know me know that Prowl is my own design....if you do not recognize it, I updated his G1 look. The car mode went through so many changes until I was truly satisfied. Solidstrike did a really nice job of giving him more life.

Solly, in terms of robot modes, only Lord knows how complex either of those two bots look like. There is tons of detail in both of them, particularly their heads. But it would be something if the robot modes are ever revealed in 3-D. If I find time, I can give you some details on how both of them look like.

Nightshade, I look forward to see the progress in Shadow's model plane as well as its final result.

[Solidstrike]

@Cass:
Thank you. Well if you think you can bring your ideas to paper I would love to give it a try. No hurry though since you know I have very little time But you could start trying to bring something down if you like. Least I need is front- and side-view.

[Cascadia]

No problem...I know your schedule is tight. I remember the description on how your character transforms. As for Prowl, I would eventually reveal what has been in my head for a long time now. Just let me know when you are really for them.

[Solidstrike]

I wish I could see into your head, Im really curious how he looks like ^^ Though before i start robot modeling I want to model another car ( no not Solly :P )

[Cascadia]

heehee....you can imagine what he looks like. I have never fully revealed what he looks like in a 2 year period. As for cars, we have a good number in our RP

[nightshade]

I wanted to show a color project I done for one of the un named Knights from the Drift series. I gave him the name of Blade, and the line art was done by Deviant artist alteride
she allowed me to do a color variation of her character.

[SDL]

WOW....

Been working on something for a small informal modelling challenge i'm doing with a few guys from a 3D website... Submission date is... midnight tonight GMT.

Will post some of the final renders afterwards

[DK Prime]

Awesome, Shade! But I guess I have told you a million times by now:lmao